Lapis ML610Q111 User Manual page 402

FEUL610Q111
Added note for using a port as comparator
22-9 22-10
input.
Corrected the condition of the rewrite count of
data flash memory.
23-1 23-1
(wrong) -20 to 75°C(Ta）
(correct) -20 to 85°C(Ta）
23-4 23-4 Added note of the 1-word writing operation.
23-5 23-5 Added note of the erase operation.
Corrected a sample program in Figure 23-2.
23-14 23-14
Added note of the sector erase operation.
Corrected a sample program in Figure 23-4.
23-16 23-16
Added note of the block erase operation.
Added a description of the time for the write
23-17 23-17
operation.
Corrected a sample program in Figure 23-6.
23-18 23-18
Added note of the 1-word writing operation.
24-1 24-1 Corrected a Figure 24-1.
Added a description of the case that there is not
24-1 24-1 a system reset circuit on a user application
circuit.
Corrected an initial value of voltage level
supervisor 1.
A-1 A-1
(wrong) 11H
(correct) Undefined
C-1 C-1 Added a supplement of rewrite count.
Corrected PLL oscillation frequency.
C-6 C-6 (wrong) Average value of 1024 clocks.
(correct) Average value of 2048 clocks.
- D-1 Added newly an application circuit example.
- E-1 Added newly a check list.
ML610Q111/ML610Q112 User's Manual
Revision History
R - 4