Table of Contents
Advertisement
S
S
UPER
ERVER 5037MC-H12TRF User's Manual
Unpacking
The motherboard is shipped in antistatic packaging to avoid electro static discharge.
When unpacking the board, make sure the person handling it is static protected.
5-2
Motherboard Installation/Removal
The X9SCE-F motherboards have been preinstalled into carriers to simplify install-
ing and removing the nodes from the SC939H-R1K63B chassis. The motherboards
should remain in these carriers at all times. If a failed node needs to be returned
for repair or replacement, the motherboard is to be shipped assembled in its car-
rier and not by itself. See Chapter 6 for instructions on installing and removing the
motherboard nodes from the chassis.
5-3
Connecting Cables
The 5037MC-H12TRF server was designed as a cableless system. As a result, all
power and data connections to the motherboard nodes are made whenever a node
is installed into its bay in the chassis. This covers the main power connection, the
control panel connections and the data and power connections for the SATA drives.
5-4
I/O Ports
The I/O ports are located at the back of the motherbord node. See Figure 5-1
below for the colors and locations of the various I/O ports. See Section 5-10 for
port defi nitions.
1
1
UID Button/LED
2
Power Button/LED
Figure 5-1. I/O Ports
2
3
I/O Ports
3
4
5-2
4
KVM
IPMI LAN Port
Advertisement
Table of Contents
