Table of Contents
Advertisement
PCIe/PCI/PnP Confi guration
This feature allows the user to set the PCI/PnP confi gurations for the following
items:
PCI ROM Priority
In case of multiple Option ROMs (Legacy and EFI-compatible), this feature specifi es
what ROM to launch. The options are Legacy ROM and EFI Compatible ROM.
PCI Latency Timer
This feature sets the latency Timer of each PCI device installed on a PCI bus. Select
64 to set the PCI latency to 64 PCI clock cycles. The options are 32, 64, 96, 128,
160, 192, 224 and 248.
Super IO Device Confi guration
Serial Port 1
Select Enabled to enable the onboard serial port. The options are Enabled and
Disabled.
Serial Port 1 Settings
This option specifi es the base I/O port address and the Interrupt Request address
of Serial Port 1. Select Auto to allow the serial port to automatically assign system
resources. The options for Serial Port 1 are Auto, (IO=3F8h; IRQ=4), (IO=3F8h;
IRQ=3, 4, 5, 6, 7, 10, 11, 12), (IO=2F8h; IRQ=3, 4, 5, 6, 7, 10, 11, 12),. (IO=3E8h;
IRQ=3, 4, 5, 6, 7, 10, 11, 12), (IO=2E8h; IRQ=3, 4, 5, 6, 7, 10, 11, 12),
Remote Access Confi guration
COM1 Console Redirection
Use this feature to enable console redirection for the COM1 port. The options are
Enabled and Disabled. The default for all ports are Disabled.
Console Redirection Settings
Confi gure the following options for the Console Redirection Settings. The
most common settings are set as default:
Terminal Type : Select ANSI, VT100, VT100+, or VT-UTF8
Bits per Second (BPS): 9600, 19200, 57600, or 115200
Data Bits: 8 or 7
7-11
Chapter 7: BIOS
Advertisement
Table of Contents
