Tektronix RSA5100A Series Programming Manual page 689

Group
Syntax
Arguments
Examples
MMEMory:LOAD:TRACe (No Query Form)
Conditions
Group
Syntax
Related Commands
Arguments
RSA6100A Series & RSA5100A Series Programmer Manual
Mass memory commands
MMEMory:LOAD:STATe <file_name>
<file_name> :: <string>
from.
The file extension is .setup. You can omit the extension.
MMEMORY:LOAD:STATE"STATE1"
STATE1.setup file.
Loads the trace data from a specified file for the currently selected view.
Measurement views (See Table 2-34.)
Mass memory commands
MMEMory:LOAD:TRACe <file_name>
MMEMory:STORe:TRACe
<file_name> :: <string>
file extension is named for the measurement view as shown in the following
table. The trace file is not available in some views which are indicated by "NA"
in the file extension column.
For the views that allow multiple-trace display, select the trace to load or store
using the command listed in the trace selection column in the following table.
You can load the specified trace with any trace data that you saved in the view
if the traces have the same units. For example, you can load Trace 2 with Trace
1 data that you saved.
specifies the file to load the instrument setup
loads the instrument setup from the
specifies the file to load the trace data from. The
Command Descriptions
2-671