Tektronix RSA5100A Series Programming Manual page 899

[SENSe]:ACPower:POINts:COUNt
Conditions
Group
Syntax
Arguments
Examples
[SENSe]:ACPower:RRCRolloff
Conditions
Group
Syntax
Related Commands
Arguments
Examples
RSA6100A Series & RSA5100A Series Programmer Manual
Sets or queries the number of points used for the trace in the Channel Power and
ACPR measurement.
Measurement views: Channel power and ACPR
Sense commands
[SENSe]:ACPower:POINts:COUNt { P801 | P2401 | P4001 | P8001
| P10801 }
[SENSe]:ACPower:POINts:COUNt?
optimizes the measurement for real-time bandwidth.
RTBandwidth
optimizes the measurement for dynamic range.
DRANge
SENSE:ACPOWER:POINTS:COUNT P4001
trace of the Channel Power and ACPR display to 4001.
Sets or queries the filter parameter (roll-off ratio) for the Root Raised Cosine filter.
Measurement views: Channel power and ACPR
Sense commands
[SENSe]:ACPower:RRCRolloff <value>
[SENSe]:ACPower:RRCRolloff?
[SENSe]:ACPower:CHANnel:FILTer
specifies the filter parameter.
<value> :: <NRf>
Range: 0.0001 to 1 in 0.0001 steps.
SENSE:ACPOWER:RRCROLLOFF 0.3
Command Descriptions
sets the number of points used in the
sets the filter parameter to 0.3.
2-881