Tektronix RSA5100A Series Programming Manual page 386

Command Descriptions
DISPlay:OFDM:EVM:Y:OFFSet
Conditions
Group
Syntax
Arguments
Examples
DISPlay:OFDM:MEASview:DELete (No Query Form)
Conditions
Group
Syntax
Arguments
2-368
Sets or queries the vertical offset in the OFDM EVM view.
Measurement views: OFDM
Display commands
DISPlay:OFDM:EVM:Y:OFFSet <value>
DISPlay:OFDM:EVM:Y:OFFSet?
<value>::= <NRf> specifies the vertical offset.
DISPLAY:OFDM:EVM:Y:OFFSET –20
Deletes the specified OFDM view.
Measurement views: OFDM
Display commands
DISPlay:OFDM:MEASview:DELete { CONSte | SUMMary | STABle |
CRESponse | EVM | PERRor | MERRor | POWer }
CONSte deletes the OFDM Constellation view.
SUMMary deletes the OFDM Summary view.
STABle deletes the OFDM Symbol table view.
CRESponse deletes the OFDM Channel response view.
EVM deletes the EVM (Error Vector Magnitude) versus Time view.
PERRor deletes the Phase error versus Time view.
MERRor deletes the Magnitude error versus Time view.
POWer deletes the OFDM Power view.
RSA6100A Series & RSA5100A Series Programmer Manual
sets the vertical offset to –20%.