Tektronix RSA6100A Series Service Manual
  1. Manuals
  2. Brands
  3. Tektronix Manuals
  4. Measuring Instruments
  5. RSA6100A Series
  6. Service manual
Tektronix RSA6100A Series Service Manual

Tektronix RSA6100A Series Service Manual

Real-time spectrum analyzer serial numbers b020000 and above
Hide thumbs Also See for RSA6100A Series:
Table of Contents

Advertisement

Quick Links

Download this manual See also: Programming Manual, Instruction Manual
Service
RSA6100A Series
Real-time Spectrum Analyzer
Serial Numbers B020000 and Above
071-1914-02
This document applies to softwware
version 1.3.1043 and above.
Warning
The servicing instructions are for use by qualified
personnel only. To avoid personal injury, do not
perform any servicing unless you are qualified to
do so. Refer to all safety summaries prior to
performing service.
www.tektronix.com

Advertisement

Table of Contents
loading
Need help?

Need help?

Do you have a question about the RSA6100A Series and is the answer not in the manual?

Questions and answers

Related Manuals for Tektronix RSA6100A Series

Summary of Contents for Tektronix RSA6100A Series

  • Page 1 Service RSA6100A Series Real-time Spectrum Analyzer Serial Numbers B020000 and Above 071-1914-02 This document applies to softwware version 1.3.1043 and above. Warning The servicing instructions are for use by qualified personnel only. To avoid personal injury, do not perform any servicing unless you are qualified to do so.
  • Page 2 Copyright © Tektronix. All rights reserved. Licensed software products are owned by Tektronix or its subsidiaries or suppliers, and are protected by national copyright laws and international treaty provisions. Tektronix products are covered by U.S. and foreign patents, issued and pending. Information in this publication supercedes that in all previously published material.
  • Page 3 Warranty 2 Tektronix warrants that this product will be free from defects in materials and workmanship for a period of one (1) year from the date of shipment. If any such product proves defective during this warranty period, Tektronix, at its option, either will repair the defective product without charge for parts and labor, or will provide a replacement in exchange for the defective product.
  • Page 5 ..........4- - 17 RSA6100A Series Service Manual Serial Numbers B020000 and Above...
  • Page 6 ........5- - 2 RSA6100A Series Service Manual Serial Numbers B020000 and Above...

  • Page 7: Table Of Contents

    5- -22 Figure 5- -15: RF interface board and cables ....5- -24 RSA6100A Series Service Manual Serial Numbers B020000 and Above...
  • Page 8 Table 4- -10: Diagnostic error messages ......4- -33 RSA6100A Series Service Manual Serial Numbers B020000 and Above...
  • Page 9 Use Proper Fuse. Use only the fuse type and rating specified for this product. Do Not Operate in Wet/Damp Conditions. Do Not Operate in an Explosive Atmosphere. Keep Product Surfaces Clean and Dry. RSA6100A Series Service Manual Serial Numbers B020000 and Above...
  • Page 10 H CAUTION indicates a hazard to property including the product. The following symbol(s) may appear on the product: CAUTION Protective Ground Standby Chassis Ground Refer to Manual (Earth) Terminal RSA6100A Series Service Manual Serial Numbers B020000 and Above...
  • Page 11 Disconnect power, remove battery (if applicable), and disconnect test leads before removing protective panels, soldering, or replacing components. To avoid electric shock, do not touch exposed connections. RSA6100A Series Service Manual Serial Numbers B020000 and Above...
  • Page 12 Service Safety Summary viii RSA6100A Series Service Manual Serial Numbers B020000 and Above...
  • Page 13 Preface This is the service manual for the RSA6100A Series Real-time Spectrum Analyzers. Read this preface to learn how this manual is structured, what conventions it uses, and where you can find other information related to servicing this product. Manual Content This manual contains only information related to servicing an RSA6100A Series Real-time Spectrum Analyzer.
  • Page 14 RSA6100A Series Real-time Spectrum Analyzer User Documentation CD-ROM or can be downloaded from the Tektronix Web site (www.tektronix.com). H RSA6100A Series Real-time Spectrum Analyzer Quick Start User Manual. This document provides the basic information you need to install and operate the instrument.

  • Page 15: Operating Information 1

    Operating Information...
  • Page 17 Operating Information For information on installing and operating your RSA6100A Series Real-time Spectrum Analyzer, refer to the Quick Start User Manual. 1- 1 RSA6100A Series Service Manual Serial Numbers B020000 and Above...
  • Page 18 Operating Information 1- 2 RSA6100A Series Service Manual Serial Numbers B020000 and Above...

  • Page 19: Theory Of Operation 2

    Theory of Operation...
  • Page 21 Processor System The processor system consists of a PCI- -based processor board and a digital interface board that connects the processor to the acquisition board. 2- 1 RSA6100A Series Service Manual Serial Numbers B020000 and Above...
  • Page 22 The CD- -R drive, optional DVD- -RW, or removable HDD, communicate over an IDE connection directly to the processor system. Rear Panel Table 2- -1 describes the connectors available on the RTSA rear panel. 2- 2 RSA6100A Series Service Manual Serial Numbers B020000 and Above...

  • Page 23: Table 2- 1: Rear Panel Connectors

    Seven individual fans provide cooling to the RTSA. Three fans are dedicated to the RF Deck and are controlled by the RF Interface. Two fans provide cooling for the digital side of the instrument. 2- 3 RSA6100A Series Service Manual Serial Numbers B020000 and Above...
  • Page 24 Power Conversion board from the Digital Interface board. A seventh fan is resident on the processor board heat sink, and is controlled by the Slot PC board. 2- 4 RSA6100A Series Service Manual Serial Numbers B020000 and Above...

  • Page 25: Figure 2- 1: Rsa6100A Series Block Diagram

    14 GHz Extension RF Switches Module Module 4 GHz IF Reference RF Attenuator 1st LO Module Preamplifier Module RF Input Oscillator Module Figure 2- 1: RSA6100A Series block diagram 2- 5 RSA6100A Series Service Manual Serial Numbers B020000 and Above...
  • Page 26 Theory of Operation 2- 6 RSA6100A Series Service Manual Serial Numbers B020000 and Above...
  • Page 27 Adjustment Procedure...
  • Page 29 Adjustment Procedure There are no physical user adjustment procedures for the RSA6100A Series instruments. However, you can run Alignments from the RSA6100A Series application. Alignments are software-controlled adjustment procedures. Running Alignments Alignments are adjustment procedures run by the instrument using internal reference signals and measurements, and do not require any external equipment or connections.
  • Page 30 Alignments are adjustment procedures run by the instrument using internal Calibrations reference signals and measurements. Calibrations can only be performed at a Tektronix service center and require the use of traceable test equipment (signal sources and measuring equipment) to verify the performance of the instrument. 3- 2...
  • Page 31 Maintenance...

  • Page 33: General 2

    3. Discharge the static voltage from your body by wearing a grounded antistatic wrist strap while handling these modules. Perform service of static-sensitive modules only at a static-free work station. 4- 1 RSA6100A Series Service Manual Serial Numbers B020000 and Above...

  • Page 34: Inspection And Cleaning 4

    Do not use abrasive compounds on any part of the chassis that may damage the chassis. Clean the On/Standby switch using a dampened cleaning towel. Do not spray or wet the switch directly. 4- 2 RSA6100A Series Service Manual Serial Numbers B020000 and Above...

  • Page 35: Table 4- 1: External Inspection Checklist

    Avoid scrubbing the display with excessive force. Clean the flat panel display surface by gently rubbing the display with a clean-room wipe (such as Wypall Medium Duty Wipes, #05701, available from Kimberly-Clark Corporation). 4- 3 RSA6100A Series Service Manual Serial Numbers B020000 and Above...

  • Page 36: Table 4- 2: Internal Inspection Check List

    Cleaning Procedure — Interior. To clean the instrument interior, do the following steps: 1. Blow off dust with dry, low-pressure, deionized air (approximately 9 psi). 4- 4 RSA6100A Series Service Manual Serial Numbers B020000 and Above...
  • Page 37 (75% solution), and a clean lint-free cloth dampened in warm deionized water. (A cotton-tipped applicator is useful for cleaning in narrow spaces and on circuit boards.) Lubrication. There is no lubrication required for this instrument. 4- 5 RSA6100A Series Service Manual Serial Numbers B020000 and Above...
  • Page 38 Maintenance 4- 6 RSA6100A Series Service Manual Serial Numbers B020000 and Above...

  • Page 39: Restoring The Operating System 4

    1. Connect the instrument to a local area network. 2. On the instrument Microsoft Windows desktop, double-click the Acronis TrueImage icon. 3. Click Backup to run the Create Backup Wizard. 4. Click Next. 4- 7 RSA6100A Series Service Manual Serial Numbers B020000 and Above...
  • Page 40 If you do not see the same files and folders, repeat the disk backup procedure. 4- 8 RSA6100A Series Service Manual Serial Numbers B020000 and Above...

  • Page 41: Restoring The Instrument Operating System 4

    PC with internet access, a CD burner and disk burning software. You will also need an USB external CD drive and keyboard that you can connect to the RSA6100A Series instrument. To delete the disk partition: 1.

  • Page 42: Restoring The Operating System From The Instrument Hard Disk Options 06/07) 4

    5. In the Confirmation dialog box, click Yes to restore the instrument operating system, or No to exit the restore process. The restore process takes approxi- mately 30 minutes; the actual time depends on the instrument configuration. 4- 10 RSA6100A Series Service Manual Serial Numbers B020000 and Above...

  • Page 43: Restoring The Hard Disk From A Backup Image 4

    You will need: H An external USB CD-R/W drive (Option 06/08 only) H Bootable Rescue Media CD (Tektronix part number 063-4180-XX, a standard accessory that ships with all instruments ) H Backup image of hard drive (see Creating a Disk Backup Image on...
  • Page 44 Maintenance 4- 12 RSA6100A Series Service Manual Serial Numbers B020000 and Above...

  • Page 45: Removal And Installation Procedures 4

    Safety Summary found at the beginning of this manual. Also, to prevent possible injury to service personnel or damage to the instrument components, read Installation in the RSA6100A Series Real-Time Spectrum Analyzers Quick Start User Manual, available on the Web at www.tektronix.com\manuals, and Preventing ESD in this section.

  • Page 46: Table 4- 3: Tools Required For Module Removal

    Figure 4- -1, on page 4- -16, shows the approximate location of the primary customer replaceable modules. 4- 14 RSA6100A Series Service Manual Serial Numbers B020000 and Above...

  • Page 47: Table 4- 5: Accessing Modules

    Real Time IQ/IF Output Acquisition board (if installed) RTT/DPSA board Slot PC Internal HDD (if installed) n n n Power Conversion Board n n n Power Supply n n n n RF Interface Board 4- 15 RSA6100A Series Service Manual Serial Numbers B020000 and Above...

  • Page 48: Figure 4- 1: Primary Customer Replaceable Module Locations

    CD- - ROM or removable drive RF deck fans Front panel and display RF deck (not replaceable) RF Interface board Figure 4- 1: Primary customer replaceable module locations 4- 16 RSA6100A Series Service Manual Serial Numbers B020000 and Above...

  • Page 49: Removal Procedures 4

    1. Remove the six T- -15 screws that secure the Front Panel to the chassis; two on the top, two on the right side, and two on the front. 4- 17 RSA6100A Series Service Manual Serial Numbers B020000 and Above...
  • Page 50 3. Pry the detents retaining the top cover apart, and remove the top cover. 4. Remove the four screws securing the hard drive/solid state drive to the bottom cover. 5. Separate the hard disk drive/solid state drive from the HDD Adapter board. 4- 18 RSA6100A Series Service Manual Serial Numbers B020000 and Above...
  • Page 51 NOTE. If you have a removable HDD mounted above the front panel you will not have an internal hard disk drive. 1. Disconnect the IDE cable from the Slot PC to the hard disk drive. 4- 19 RSA6100A Series Service Manual Serial Numbers B020000 and Above...

  • Page 52: Table 4- 6: Power Conversion Board Connectors

    5. Disconnect the EXT TRIG IN (J24) and TRIG OUT (J25) cables from the Main board. 6. Remove the three T- -15 screws securing the power supply shield tabs to the front chassis. 4- 20 RSA6100A Series Service Manual Serial Numbers B020000 and Above...
  • Page 53 10. Remove the one T- -15 screw securing the ground wire to the power supply shield. 11. Remove the four T- -15 screws securing the power supply shield to the Power Supply. 12. Slide the Power Supply out of the power supply shield. 4- 21 RSA6100A Series Service Manual Serial Numbers B020000 and Above...
  • Page 54 Maintenance 4- 22 RSA6100A Series Service Manual Serial Numbers B020000 and Above...

  • Page 55: Troubleshooting 4

    Safety Summary found at the beginning of this manual. Also, to prevent possible injury to service personnel or damage to the instrument components, read Installation in the RSA6100A Series Real-Time Spectrum Analyzers Quick Start User Manual, available on the Web at www.tektronix.com\manuals, and Preventing ESD in this section.

  • Page 56: Table 4- 7: Failure Symptoms And Possible Causes

    H Defective cable from inverter board to backlighting display lamp H Defective backlighting display lamp H Faulty display H Faulty digital interface board H Faulty inverter board H Faulty display adapter board 4- 24 RSA6100A Series Service Manual Serial Numbers B020000 and Above...

  • Page 57: Figure 4- 2: Status Indicator Locations

    Interface boards to ensure the power supplies are operating. See Figure 4- -2, and Tables 4- -8 and 4- -9. Power Power Supply Conversion Digital Interface Board DS4811 DS481 Figure 4- 2: Status indicator locations 4- 25 RSA6100A Series Service Manual Serial Numbers B020000 and Above...

  • Page 58: Table 4- 8: Power Converter Board Status Indicators

    +3.3 V OK DS485 +2.5 V OK DS486 +1.8 V OK DS487 +1.5 V OK DS488 FPGA INIT DS489 FPGA DONE DS4810 STATUS 0 DS4811 STATUS 1 (normally off) 4- 26 RSA6100A Series Service Manual Serial Numbers B020000 and Above...

  • Page 59: Figure 4- 3: Diagnostics Power On Self Test Results View

    Figure 4- 3: Diagnostics Power On Self Test results view Further information about the failure can be obtained from the Diags Failure Info tab in the Diagnostics window (see Figure 4- -4). 4- 27 RSA6100A Series Service Manual Serial Numbers B020000 and Above...

  • Page 60: Figure 4- 4: Diagnostics Failure Info Tab

    If there is not a shortcut to the Event Viewer on the desktop you can access it by clicking the Event Viewer button on the Diagnostics Failure Info tab. See Figure 4- -5. 4- 28 RSA6100A Series Service Manual Serial Numbers B020000 and Above...

  • Page 61: Figure 4- 5: Event Viewer Initial Display

    Also note that the spectrum analyzer diagnostic errors will show TekRSA in the Source column, to differentiate them from operating system messages. 4- 29 RSA6100A Series Service Manual Serial Numbers B020000 and Above...

  • Page 62: Figure 4- 6: Event Viewer Applications Error View

    Figure 4- 6: Event viewer applications error view Double-click an error message and the Event Properties window opens for that error message. See Figure 4- -7. Figure 4- 7: Event Properties window, showing error log information 4- 30 RSA6100A Series Service Manual Serial Numbers B020000 and Above...

  • Page 63: Figure 4- 8: Starting Extended Diagnostics

    This opens the Embedded Diagnostics Interface, shown in Figure 4- -9. The Diagnostics Interface allows you to to select specific tests, and control how many times the selected tests are repeated. 4- 31 RSA6100A Series Service Manual Serial Numbers B020000 and Above...

  • Page 64: Figure 4- 9: Embedded Diagnostics Interface

    B) Repeat the test(s) until a failure occurs, C) Repeat the test(s) continuously even if failures occur, or D) Run the test(s) only one time. Figure 4- 10: Diagnostics test iteration control 4- 32 RSA6100A Series Service Manual Serial Numbers B020000 and Above...

  • Page 65: Table 4- 10: Diagnostic Error Messages

    Error reading ID’s. Send the instrument to a Tektronix Versions Service Center for repair. Unable to communicate with PPC. Send the instrument to a Tektronix Service Center for repair. 4- 33 RSA6100A Series Service Manual Serial Numbers B020000 and Above...
  • Page 66 Send the instrument to a Tektronix Service Center for repair. The Third IF not found or FPGA Load Send the instrument to a Tektronix failed. Service Center for repair. 4- 34 RSA6100A Series Service Manual Serial Numbers B020000 and Above...
  • Page 67 Verify that audio is not muted and level is set properly using Windows Volume control. If this does not correct the problem, send the instrument to a Tektronix Service Center for repair. 4- 35 RSA6100A Series Service Manual Serial Numbers B020000 and Above...
  • Page 68 ADC Over range. Signal too strong. Run signal path test. If the signal path test passes and this test fails, send the instrument to a Tektronix Service Center for repair. 4- 36 RSA6100A Series Service Manual Serial Numbers B020000 and Above...
  • Page 69 Send the instrument to a Tektronix Service Center for repair. WB Free Run Trigger Free run trigger test failed. Send the instrument to a Tektronix Test Service Center for repair. 4- 37 RSA6100A Series Service Manual Serial Numbers B020000 and Above...
  • Page 70 Tektronix Service Center for repair. DCM Not locked. Replace the RTT/DPSA Board. If the problem persists, send the instrument to a Tektronix Service Center for repair. 4- 38 RSA6100A Series Service Manual Serial Numbers B020000 and Above...
  • Page 71 Tektronix Service Center for repair. FM/AM Audio Test No audio was heard. Replace the RTT/DPSA Board. If the problem persists, send the instrument to a Tektronix Service Center for repair. 4- 39 RSA6100A Series Service Manual Serial Numbers B020000 and Above...
  • Page 72 FLK107 IF Amp Drain over/under Send the instrument to a Tektronix Current. Service Center for repair. HMC464 LO Amp Drain over/under Send the instrument to a Tektronix Current. Service Center for repair. 4- 40 RSA6100A Series Service Manual Serial Numbers B020000 and Above...
  • Page 73 Send the instrument to a Tektronix High. Service Center for repair. LO2 Frequency control DAC is set too Send the instrument to a Tektronix Low. Service Center for repair. 4- 41 RSA6100A Series Service Manual Serial Numbers B020000 and Above...
  • Page 74 Send the instrument to a Tektronix over current. Service Center for repair. The +5VC supply to the 3rd IF board Send the instrument to a Tektronix over current. Service Center for repair. 4- 42 RSA6100A Series Service Manual Serial Numbers B020000 and Above...
  • Page 75 If the problem persists, replace the RF Interface Board. If the problem persists, replace the power supply. If the problem persists, send the instru- ment to a Tektronix Service Center for repair. 4- 43 RSA6100A Series Service Manual Serial Numbers B020000 and Above...
  • Page 76 If the problem persists, replace the RF Interface Board. If the problem persists, replace the power supply. If the problem persists, send the instru- ment to a Tektronix Service Center for repair. 4- 44 RSA6100A Series Service Manual Serial Numbers B020000 and Above...
  • Page 77 If the problem persists, replace the RF Interface Board. If the problem persists, replace the power supply. If the problem persists, send the instru- ment to a Tektronix Service Center for repair. 4- 45 RSA6100A Series Service Manual Serial Numbers B020000 and Above...
  • Page 78 Acquisition Board path failed. Service Center for repair. Front Panel Front Panel Test Front Panel LCD test failed. Replace the LCD display. Front Panel Button test failed. Replace the front panel keypad. 4- 46 RSA6100A Series Service Manual Serial Numbers B020000 and Above...
  • Page 79 Replaceable Parts...
  • Page 81 Replaceable Parts This section contains a list of the replaceable modules for the RSA6100A Series Real-time Spectrum Analyzers. Use this list to identify and order replacement parts. Parts Ordering Information Replacement parts are available through your local Tektronix field office or representative.
  • Page 82 Items in this section are referenced by figure and index numbers to the exploded view illustrations that follow. Tektronix part number Use this part number when ordering replacement parts from Tektronix. 3 and 4 Serial number Column three indicates the serial number at which the part was first effective. Column four indicates the serial number at which the part was discontinued.
  • Page 83 Replaceable Parts 5- 3 RSA6100A Series Service Manual Serial Numbers B020000 and Above...
  • Page 84 5- - 1- - 17 211-1230-00 SCREW; 10- - 32X.500 SOC CAP,18- - 8 STAINLESS STEEL 5- - 1- - 18 212-0650-00 SCREW,MACHINE; 10- - 32 X 0.437,FLH,100 DEG,SST PSVT,POZ 5- 4 RSA6100A Series Service Manual Serial Numbers B020000 and Above...

  • Page 85: Figure 5- 1: External Parts

    Replaceable Parts Figure 5- 1: External parts 5- 5 RSA6100A Series Service Manual Serial Numbers B020000 and Above...
  • Page 86 SCREW, MACHINE; 6- - 32 X 0.312, FLH100, 410 SS PASSIVATED, T- - 10 TORX DR 5- - 2- - 30 174-4370-00 CA ASSY; DESCRETE,CPD,8,22AWG,10.0L,0.200CTR HDR BOTH ENDS,AT POWER 5- 6 RSA6100A Series Service Manual Serial Numbers B020000 and Above...
  • Page 87 Replaceable Parts Figure 5- 2: Display, front panel, DVD, and removeable hard drive 5- 7 RSA6100A Series Service Manual Serial Numbers B020000 and Above...
  • Page 88 15- - pin ribbon display cable Front chassis 10- - pin ribbon display cable Digital interface board Figure 5- 3: Detail 1 of cabling shown in Figure 5- 2 5- 8 RSA6100A Series Service Manual Serial Numbers B020000 and Above...
  • Page 89 Replaceable Parts Removable hard drive HDD adapter board Power converter board Figure 5- 4: Detail 2 of cabling shown in Figure 5- 2 5- 9 RSA6100A Series Service Manual Serial Numbers B020000 and Above...
  • Page 90 Replaceable Parts Front chassis Front panel cable Front panel board Front panel cable Digital interface board Front chassis Figure 5- 5: Detail 3 of cabling shown in Figure 5- 2 5- 10 RSA6100A Series Service Manual Serial Numbers B020000 and Above...
  • Page 91 CA ASSY,SP; IDC,TW FLAT,I & Q OUTPUT TO REAR PANEL,50 POS; SAFETY CONTROLLED, (OPT. 05 ONLY) 5- - 6- - 19 174-5104-00 CA ASSY,RF,FLEX- - COAX; IF OUT TO REAR PANEL,SMB,BNC; SAFETY CONTROLLED, (OPT. 05 ONLY) 5- 11 RSA6100A Series Service Manual Serial Numbers B020000 and Above...

  • Page 92: Figure 5- 6: Modules

    Replaceable Parts Acquisition Board (not replaceable) Chassis (not replaceable) Digital Interface LAN (not replaceable) Figure 5- 6: Modules 5- 12 RSA6100A Series Service Manual Serial Numbers B020000 and Above...
  • Page 93 Replaceable Parts Slot PC board Figure 5- 7: Detail 1 of Slot PC Cabling shown in Figure 5- 6 5- 13 RSA6100A Series Service Manual Serial Numbers B020000 and Above...
  • Page 94 Replaceable Parts Slot PC board Digital interface board Slot PC board Digital interface board Figure 5- 8: Detail 2 of Slot PC Cabling shown in Figure 5- 6 5- 14 RSA6100A Series Service Manual Serial Numbers B020000 and Above...

  • Page 95: Figure 5- 9: Detail Of Cabling Shown In Figure 5- 6 (Cont.)

    IQ out cables IF out cable IF out Digital IQ out (LVDS) Option rear conver plate Figure 5- 9: Detail of cabling shown in Figure 5- 6 (cont.) 5- 15 RSA6100A Series Service Manual Serial Numbers B020000 and Above...
  • Page 96 5- - 10- - 16 NF CY,100 NF CX,IEC INPUT,FAST- - ON/SOLDER LUG OUTPUT,CHASSIS MOUNT,SAFETY CONTROLLED;FN9222- - 6/06 5- - 10- - 17 211-0380-00 SCREW,MACHINE; 4- - 40 X 0.375,FLH,CD PL,T- - 9 5- 16 RSA6100A Series Service Manual Serial Numbers B020000 and Above...

  • Page 97: Figure 5- 10: Power Supply And Internal Hard Drive

    Replaceable Parts Figure 5- 10: Power supply and internal hard drive 5- 17 RSA6100A Series Service Manual Serial Numbers B020000 and Above...
  • Page 98 Hard drive power from J6 on power converter board Slot PC board Power converter board Digital interface board Figure 5- 11: Detail 1 of cabling shown in Figure 5- 10 5- 18 RSA6100A Series Service Manual Serial Numbers B020000 and Above...
  • Page 99 IDE from slot PC board Line trigger from power supply Power converter board Front chassis Power supply cable to line filter Figure 5- 12: Detail 2 of cabling shown in Figure 5- 10 5- 19 RSA6100A Series Service Manual Serial Numbers B020000 and Above...
  • Page 100 P- - P, FREQ 3.5- - 5.5KHZ,PKG DIA 13 MM X 7.8 MM H,5.0MM PIN SPACING,NOT MACHINE WASHABLE;PKM13EPY- - 4000- - TF01,T&R 5- - 13- - 10 174-5056-00 CA ASSY,RF,FLEX- - COAX; FRONT PANEL ACQ 5- 20 RSA6100A Series Service Manual Serial Numbers B020000 and Above...

  • Page 101: Figure 5- 13: Upper And Lower Deck Fans

    Replaceable Parts Figure 5- 13: Upper and lower deck fans 5- 21 RSA6100A Series Service Manual Serial Numbers B020000 and Above...
  • Page 102 RF interface board JFan 2 RF deck JFan 1 JFan 3 Dress RF deck lower fan cables as show Figure 5- 14: Detail of cabling shown in Figure 5- 13 5- 22 RSA6100A Series Service Manual Serial Numbers B020000 and Above...
  • Page 103 5- - 15- - 3 174-5097-00 CA ASSY,SP; IDC,RIBBON,CONTROL LINES,BULKHEAD TO RF INTERFACE,2X7; SAFETY CONTROLLED 5- - 15- - 4 174-5119-00 CA ASSY,PWR; IDC,RIBBON,BULKHEAD TO RF INTERF,2X25,0.100 CTR; SAFETY CONTROLLED 5- 23 RSA6100A Series Service Manual Serial Numbers B020000 and Above...

  • Page 104: Figure 5- 15: Rf Interface Board And Cables

    RF interface board RF interface board RF deck Instrument front RF power, 60- - pin ribbon cable to bulkhead connectoron chassis Figure 5- 15: RF interface board and cables 5- 24 RSA6100A Series Service Manual Serial Numbers B020000 and Above...

Table of Contents