Tektronix RSA5100A Series Programming Manual page 1113

Arguments
Examples
[SENSe]:SGRam:FREQuency:STOP
Conditions
Group
Syntax
Related Commands
Arguments
Examples
[SENSe]:SGRam:TIME[:SCALe]:MODe
Conditions
Group
RSA6100A Series & RSA5100A Series Programmer Manual
or specifies that the frequency step size is set manually using the
OFF 0
[SENSe]:SGRam:FREQuency:STEP
specifies that the frequency step size is set automatically.
or
ON 1
SENSE:SGRAM:FREQUENCY:STEP:AUTO ON
size is set automatically.
Sets or queries the measurement stop frequency (right edge of the graph) in the
spectrogram.
The center, start and stop frequencies are set interlocking each other. Refer to the
[SENSe]:SGRam:FREQuency:CENTer
Measurement views: Spectrogram
Sense commands
[SENSe]:SGRam:FREQuency:STOP <value>
[SENSe]:SGRam:FREQuency:STOP?
[SENSe]:SGRam:FREQuency:STARt
is the measurement start frequency.
<value> :: <NRf>
Range: (center frequency) ± (span)/2.
SENSE:SGRAM:FREQUENCY:STOP 7.05GHz
7.05 GHz.
Sets or queries the vertical mode.
Measurement views: Spectrogram
Sense commands
Command Descriptions
command.
specifies that the frequency step
command.
sets the stop frequency to
2-1095