Tektronix RSA5100A Series Programming Manual page 306

Command Descriptions
DISPlay:AVTime:X[:SCALe]:AUTO (No Query Form)
Conditions
Group
Syntax
Related Commands
Arguments
Examples
DISPlay:AVTime:X[:SCALe]:AUTO:STATe
Conditions
Group
Syntax
Arguments
Examples
2-288
Sets the horizontal scale automatically to fit the waveform to the screen
in the Amplitude versus Time view. Executing this command sets
DISPlay:AVTime:X[:SCALe]:AUTO:STATe ON.
Measurement views: Amplitude versus Time
Display commands
DISPlay:AVTime:X[:SCALe]:AUTO
DISPlay:AVTime:X[:SCALe]:AUTO:STATe
None
DISPlay:AVTime:X:SCALe:AUTO
the waveform to the screen.
Determines whether to set the horizontal scale automatically or manually.
Measurement views: Amplitude versus Time
Display commands
DISPlay:AVTime:X[:SCALe]:AUTO:STATe { OFF | ON | 0 | 1 }
DISPlay:AVTime:X[:SCALe]:AUTO:STATe?
or specifies that the horizontal scale is set manually. To set it, use the
OFF 0
DISPlay:AVTime:X[:SCALe]:FULL
commands.
or specifies that the horizontal scale is set automatically.
ON 1
DISPLAY:AVTIME:X:SCALE:AUTO:STATE ON
scale is set automatically.
RSA6100A Series & RSA5100A Series Programmer Manual
sets the horizontal scale automatically to fit
and DISPlay:AVTime:X[:SCALe]:OFFSet
specifies that the horizontal