Tektronix RSA5100A Series Programming Manual page 1036

Command Descriptions
Syntax
Related Commands
Arguments
Examples
[SENSe]:PHVTime:FREQuency:STEP:AUTO
Conditions
Group
Syntax
Arguments
Examples
[SENSe]:PHVTime:FREQuency:STOP
Conditions
2-1018
[SENSe]:PHVTime:FREQuency:STEP <value>
[SENSe]:PHVTime:FREQuency:STEP?
[SENSe]:PHVTime:FREQuency:STEP:AUTO
specifies the frequency step size.
<value> :: <NRf>
Range: 0 Hz to 6.2 GHz (RSA6106A) / 14 GHz (RSA6114A).
SENSE:PHVTIME:FREQUENCY:STEP 1.5kHz
Determines whether to set the frequency step size automatically or manually.
Measurement views: Phase versus Time
Sense commands
[SENSe]:PHVTime:FREQuency:STEP:AUTO { OFF | ON | 0 | 1 }
[SENSe]:PHVTime:FREQuency:STEP:AUTO?
or specifies that the frequency step size is set manually using the
OFF 0
[SENSe]:PHVTime:FREQuency:STEP
or specifies that the frequency step size is set automatically.
ON 1
SENSE:PHVTIME:BANDWIDTH:AUTO ON
automatically.
Sets or queries the measurement stop frequency (right edge of the graph) in the
Phase versus Time measurement.
The center, start and stop frequencies are set interlocking each other. Refer to the
[SENSe]:PHVTime:FREQuency:CENTer
Measurement views: Phase versus Time
RSA6100A Series & RSA5100A Series Programmer Manual
sets the step size to 1.5 kHz.
command.
sets the frequency step size
command.