Tektronix RSA5100A Series Programming Manual page 616

Command Descriptions
Syntax
Arguments
Returns
Examples
FETCh:PULSe:STATistics:PPFRequency? (Query Only)
Conditions
Group
Syntax
Arguments
Returns
Examples
2-598
FETCh:PULSe:STATistics:PHDeviation?
None
<phase_dev_avg>,<phase_dev_min>,<phase_dev_max>
Where
<phase_dev_avg> ::
<phase_dev_min> ::
<phase_dev_max> ::
Unit: Degrees.
FETCH:PULSE:STATISTICS:PHDEVIATION?
for the phase deviation in the pulse statistics.
17.374
Returns the pulse-pulse carrier frequency in the pulse statistics. This command is
valid when DISPlay:PULSe:STATistics:PLOT
Measurement views: Pulse statistics
Fetch commands
FETCh:PULSe:STATistics:PPFRequency?
None
<pp_freq_avg>,<pp_freq_min)>,<pp_freq_max>
Where
<pp_freq_avg> ::
<pp_freq_min> ::
<pp_freq_max> ::
Unit: Hz.
FETCH:PULSE:STATISTICS:PPFREQUENCY?
1.135E+3,311.3E+3,-262.8E+3
carrier frequency in the pulse statistics.
RSA6100A Series & RSA5100A Series Programmer Manual
is the average phase deviation.
<NRf>
is the minimum phase deviation.
<NRf>
is the maximum phase deviation.
<NRf>
might return
is set to TRENd.
is the average pulse-pulse carrier frequency.
<NRf>
is the minimum pulse-pulse carrier frequency.
<NRf>
is the maximum pulse-pulse carrier frequency.
<NRf>
might return
for the pulse-pulse
11.678,7.694,