Power Cords And Connector Types; Updates Of The Sparc Enterprise M3000 Server Service Manual - Sun Microsystems SPARC Enterprise M3000 Product Notes

Power Cords and Connector Types

The following information supersedes the information in the SPARC Enterprise
M3000 Server Site Planning Guide and the SPARC Enterprise M3000 Server Installation
Guide.
The corrected table for power cords and connector types is as follows, corresponding
with TABLE 2-4 in both docuuments.
Power Cords and Connector Types
TABLE 2-4
Location Power cord type
Japan NEMA5-15 125V15A
North America NEMAL6-15 250V15A
China GB 2099.1 250V15A
Hong Kong BS1363 250V15A
South Korea IEC60320-C14 250V15A
Note – For servers that have the B-type plug, confirm that a 15A overcurrent
protection device is available outside the server. If one is not available, prepare an
external 15A overcurrent protection that can be achieved by means of no-fuse
breakers (NFBs) or fuses. The B-type plug refers to plugs other than grounding-type
ones with two parallel blades, such as the NEMA L6-30, L6-20, L6-15, and L5-15
Updates of the SPARC Enterprise M3000 Server
Service Manual
The following information supersedes the information in the SPARC Enterprise
M3000 Server Service Manual.
connector type
IEC 60320 C13
Chapter 2 Information About Hardware 13