Power-Off By Using The Xscf Command - Sun Microsystems SPARC Enterprise M3000 Product Notes

Power-off by Using the XSCF Command

The description here corrects section 4.5.1.1, "Power-off by Using the XSCF
Command."
1. Notify users that the server is going down.
2. Back up the system files and data as necessary.
3. Log in to the XSCF Shell and type the poweroff command.
XSCF> poweroff -a
The following actions occur when the poweroff command is used:
■
■
For details of the command, see the XSCF Reference Manual for your server.
Caution – There is an electrical hazard if the power cords are not disconnected. All
power cords must be disconnected to completely remove power from the server.
14 Sun SPARC Enterprise M3000 Server Product Notes for XCP 1090 • August 2009
The Solaris OS shuts down cleanly.
The server powers off to Standby mode (the XSCF unit and one fan will still
have power).