Sun Microsystems SPARC Enterprise M3000 Product Notes page 32

Documentation Updates
TABLE 3-5
Document
SPARC Enterprise
M3000/M4000/M5000/
M8000/M9000 Servers XSCF
Reference Manual and XSCF
man pages
22 Sun SPARC Enterprise M3000 Server Product Notes for XCP 1090 • August 2009
Issue
setdualpowerfeed(8)
command
setupfru(8) command
showdevices(8)
command
showenvironment(8)
command
Change
The following description will be added in
DESCRIPTION:
The dual power feed mode cannot be used with 100V
power on M4000/M5000 servers.
The following description will be added in
EXTENDED DESCRIPTION:
Although a CMU with two CPUMs can be
configured into Quad-XSB mode on an
M8000/M9000 server, the server generates a
"configuration error" message for thsoe XCBs that do
not have a CPUM and memory.
The following information will be added:
After a DR operation and subsequent domain power
cycle, you must run the command devfsadm -v
command before running showdevices. Otherwise,
the resulting display from showdevices will be
erroneous.
The following information will be added:
The power operand is supported only on M3000
servers, and the air operand is supported only on
M3000/M8000/M9000 servers.