Datalogic DS8110 Reference Manual page 96

4
1. Enter the appropriate information in the form as described below:
Field Name
Code Combination
No Read Message
Use 'Global No Read
String' when No
Codes Read
Global No Read String
(max. 128 chars)
Multiple Read
Message
Multiple Read String
(max. 128 chars)
84
Action/Definition
Standard Multi Label has been selected.
Select Disable No Read Message, Global No Read Message, or Local No
Read(s) Message from the drop-down list. The No Read condition occurs
whenever a code cannot be read or decoded.

Disable No Read Message: The No Read Message is not
transmitted.

Global No Read Message: The No Read String will be sent if the
scanner is unable to decode one or more barcodes in the reading
phase.

Local No Read(s) Message: This option is useful when one or more
codes are not read in the reading phase or when more codes than
the expected number set by the configuration parameters are read.
If working in Standard Multi Label mode, this option activates the
Code Label Local No Read String and the Code Label Local
Multiple Read String parameters which allow setting a Local No
Read String and a Local Multiple string for each defined code
symbology.
Select the check box to allow the Global No Read String to be used if no
codes at all are read. This option is not available when Global No Read
Message is selected from the No Read Message drop-down list.
Click to activate the Text Entry Tool and create a string to be displayed
when Global No Read Message is selected from the No Read Message
drop-down list. Click Submit to save your text to the origin window text field,
or click Cancel to return to origin window without transferring text.
Select Disable or Enable from the drop-down list. This string will be sent if,
during the reading phase, the scanner reads more than the number of the
expected barcodes
Click to activate the Text Entry Tool and create a string to be displayed in
case of Multiple Read Message. Click Submit to save your text to the origin
window text field, or click Cancel to return to origin window without
transferring text.
This parameter is only available when Multiple Read Message is enabled
and the No Read Message selection is different from Local No Read(s)
String. It is possible to select either the ASCII or HEX value. If disabled, the
scanner transmits the first code read.
DS8110 REFERENCE MANUAL
set by the configuration parameters.