Datalogic DS8110 Reference Manual page 129

E-GENIUS
Modify Settings | Global Settings | Ethernet | Ethernet/IP
Use the Ethernet I/P window to set up digital inputs and outputs for the barcode scanner.
To enable or disable Ethernet/IP:
1. In the tree menu under Modify Settings, navigate to Global Settings | Ethernet |
Ethernet/IP. The Ethernet/IP window opens.
2. Enter the appropriate information in the form as described below:
Field Name Action/Definition
Enable Select the check box to enable Ethernet/IP and reveal the related configuration
Ethernet/IP options.
Ethernet/IP Select DLA Object or ASI Object from the drop-down list.
Object
Selection Selection:


Enable Select the check box to enable On-Demand Messaging when ASI Object is
ControlLogix selected.
On-Demand
Messaging
On-Demand
ControlLogix/CompactLogix Controllers. When enabled, you must provide the
Controller IP Address, the Slot number of the processor in the Controller and a Tag
Name. To use On-Demand messaging, a tag of the same name is then defined on
the ControlLogix/CompactLogix Controller and every time a bar code is read, the
Bar Code object is transferred to the ControlLogix/CompactLogix Tag.
Trigger (Input 1) Select Disable or Enable from the drop-down list. If enabled, the Scanner Master or
Echo SC5000 Controller Trigger (Input 1) status is echoed to the Ethernet Client via bit 0
in Byte InputBits of the DL_InputStruct.
DLA Object - Refers to Datalogic Devices
ASI Object - Refers to legacy Accu-Sort Devices
Messaging is
DLA Object: Digital Input Lines
a special option for communicating
4
with
117