Datalogic DS8110 Reference Manual page 175

E-GENIUS
Field Name Action/Definition
Use Aux Select None, Deactivation, Activation, or Activation and Deactivation from the
Serial Port drop-down list. This parameter allows defining the function to be performed by the Aux
For Serial Port:
 None: No function is performed by the digital input.
 Deactivation: The digital input is used to deactivate the Energy Saving. Thus, the
motor and laser of all network scanners will be turned on.
 Activation: The digital input is used to activate the Energy Saving. Thus, the motor
and laser of all network scanners will be turned off.
 Activation and Deactivation: The digital input is used to both activate and
deactivate the Energy Saving. Thus, the motor and laser of all network scanners
will be turned on/off.
Header
Click
define a header (1 byte) and transmit it as a block preceding the activation/deactivation
string sent to a Master or Stand Alone scanner. Use characters from NUL (00H) to ~
(7EH). Click Submit to save your text to the origin window text field, or click Cancel to
return to origin window without transferring text.
Terminator
Click
terminator (1 byte) and transmit it as a block following the activation/deactivation string
sent to the Master or Stand Alone scanner. Use characters from NUL (00H) to ~ (7EH).
Click Submit to save your text to the origin window text field, or click Cancel to return
to origin window without transferring text.
Activation
String
Click
to be transmitted within the output message to activate the Energy Saving. Click
Submit to save your text to the origin window text field, or click Cancel to return to
origin window without transferring text.
Deactivation
String
Click
within the output message to deactivate the Energy Saving. Click Submit to save
your text to the origin window text field, or click Cancel to return to origin window
without transferring text.
NOTE: This parameter is available only when a communication channel
has been selected to perform a specific function.
to activate the Text Entry Tool and create a Header (up to 128 bytes) to
NOTE: This parameter is available only when a communication channel
has been selected to perform a specific function.
to activate the Text Entry Tool and create a Terminator to define a
NOTE: This parameter is available only when a communication channel
has been selected to perform the Activation or Activation and
Deactivation function.
to activate the Text Entry Tool and create a string that defines the characters
NOTE: This parameter is available only when a communication channel
has been selected to perform the Deactivation or Activation and
Deactivation function.
to activate the Text Entry Tool and create a character string to be transmitted
4
163