Datalogic DS8110 Reference Manual page 230

5
14. Measure the distance for Z from the conveyor bed to the laser line intersecting the
barcode, and enter that distance in the first box under
Your measurements will likely differ from those shown below.
15. Click Calibrate 3. PackTrack data is displayed for the third code.
16. Click Compute Results. The results are displayed at the top of the PackTrack
Calibration window.
17. Click Update. "Update Successful" should be displayed in the PackTrack Calibration
window.
218
50
50
50
DS8110 REFERENCE MANUAL
.
Z-Coord (mm)