Table of Contents
Advertisement
E-GENIUS
Field Name
Action/Definition
Start Input
Select an input from the drop-down list to define
Number
the number of the input starting the reading
phase.
Start Input
Select Active Open or Active Closed from the
Active Level
drop-down list.
Stop Input
Select an input from the drop-down list to define
Number
the input ending the reading phase.
Stop Input
Select Active Open or Active Closed from the
Active Level
drop-down list to define the active state of the
input.
Reading Phase
If checked, it allows defining a timeout for the
Timeout
Serial On Line mode and the On Line 1 Input
mode.
Stop Phase
Select Trailing or Leading from the drop-down
Edge
list to define the signal edge of the stop input used
by the scanner as reference for ending the
reading phase:
Active Open: The input is active when
there is no current flowing through IN
pins. The input from the trigger source is
normally closed. The scanner goes into
trigger mode when the input source is
opened.
Active Closed: The input is active when
current flows through IN pins. The input
from the trigger source is normally
opened. The scanner goes into trigger
mode when the input source is closed.
Active Open: The input is active when
there is no current flowing through IN
pins. The input from the trigger source is
normally closed. The scanner goes into
trigger mode when the input source is
opened.
Active Closed: The input is active when
current flows through IN pins. The input
from the trigger source is normally
opened. The scanner goes into trigger
mode when the input source is closed.
Trailing: The reading phase ends when
the package has completely passed by
the stop input.
Leading: The reading phase ends as
soon as the stop input detects the front
edge of the package.
4
63
- Quick Links:
- Connecting a Ds8110 Scanner
Hide quick links:
Advertisement
Table of Contents
