Datalogic DS8110 Reference Manual page 143

E-GENIUS
Field Name Action/Definition
Spontaneous Select check box to enable. In case of diagnostic errors, this
Status message is sent every 40 seconds.
Message
Purolator Select the check box to enable. If enabled, all service labels
Custom sharing the following characteristics will not be filtered by the
Check Code Filter Depth and Encoder Timeout
parameters:
 all service labels containing 2 characters only (e.g. "F1",
"F2", ecc);
 all service labels of 8 characters starting with "ENP";
 all service labels of 9 characters starting with "OSNR".
Code Filter
Enable UPS Select the check box to enable. If selected, the UPS Code
Code Filter Filters, PTN Code Filters, and Postal Code Filters panels
open.
UPS Code Filters
Tracking Label -
Starts with '1Z'
Service
Upgrade Label -
Starts with'403',
Length is 8
PTN Code Filters
Select all codes
of PTN
except
below
must
selected)
Starts with...
Select check box to enable. If selected,
function allows the transmission of codes
belonging to the Code 128 and Code 39
families starting with '1Z', '3Z', '1B' or '3B'.
The length of these codes is 18 digits.
Select check box to enable. If selected,
function allows the transmission of codes
belonging to the Code 128 and Code 39
families starting with '403'. The length of
these codes is 8 digits.
Select check box to enable. If selected, it is
type, possible to transmit all Code 128 and Code
codes 39 codes belonging to this type having a
(that length of 11 digits with the exception of
be those starting with:
- '400', '420', '421', '51L', '52L', '54L', '55L'
Select each check box to enable/include
that prefix.
4
131