Datalogic DS8110 Reference Manual page 110

4
Field Name
Priority Filter Select the check box to display the Priority Filter options. This function allows the
Enable
Priority Filter
Priority Filter
98
Action/Definition
user to prioritize barcodes.
Example:
If there is a message with a field that should contain one of multiple code
types (for example, Code128, Code39 and I2of5). In this field, the user
wants:

If Code 128 is read, it goes in the field (any code39 and I2of5 are
ignored)

If Code 128 is not read – if Code39 is read, it goes in the field (and I2of5
is ignored)

If Code 128 and Code30 are not read – if i2of5 is read, it goes in the
field.
Enter the Group List in the field provided. This field defines
Group List the specific Logical Combination groups to which the
Priority Filter will apply. The groups are numbered
according to the order in which they are listed (from left to
right) in the Logical Combination Rule parameter.
Format: Group Number(s) separated by the comma
character
Select Normal or Advanced from the drop-down list.
Type
Description:
Example:
1,3 means the Priority Filter is applied to Logical
Groups 1 and 3. Logical Group 2 will not have the
Priority Filter applied, however it will follow the
normal rules of code analysis, and if selected, the
Strip Filter parameters will apply.

Normal: Uses the Logical Combination Rule string
to define the priority

Advanced: Uses the Priority Filter Advanced String
to define the priority. Advanced type allows the
priority filter to essentially take "priority" over the
Logical Combination Rule string.
DS8110 REFERENCE MANUAL