7.2.3. Return from Cascade Port
After entering cascade port, pressing <R> will return to the upper layer
OSD menu.
7.3. Setup in OSD: <F1>
Please use the <Up> or <Down> arrow keys to select the item you want to
change, and use <Left> or <Right> arrow keys to change the settings.
Press <ESC> to exit and save your configuration.
7.3.1. Scan Mode
Select:
Scan the selected channels marked with S in the STA column on the
OSD main menu.
PC ON:
Scan all PC channels which are powered on.
Fig. 18: Channel Banner (Cascade Layer)
Figure 19: OSD Setup
Channel Name
Channel Number
nd
2
Layer Channel Number
st
1
Layer Channel Number
23