Table of Contents
Advertisement
Quick Links
Installation Guide
AMPS
IN BUILDING
Bi-directional Amplifier
#801102 (43dB Model)
#801103 (50dB Model)
#801104 (60dB Model)
FCC ID: PWO824WB56
IC: 4726A-824WB56
Wilson Electronics, Inc.
3301 E. Deseret Drive, St. George, Utah 84790
For additional technical support go to
www.wilsonelectronics.com
Phone: 1-866-294-1660
The term "IC:" before the radio certification number only signifies
that Industry of Canada technical specifications were met.
iDEN
IN BUILDING
Bi-directional Amplifier
#804001 (43dB Model)
#804003 (50dB Model)
#804004 (60dB Model)
FCC ID: PWO806WB56
IC: 4726A-806WB56
Fax: 1-435-656-2432
Advertisement
Table of Contents
Related Manuals for Wilson Electronics 801102
Summary of Contents for Wilson Electronics 801102
-
Page 1: Installation Guide
Installation Guide AMPS iDEN IN BUILDING IN BUILDING Bi-directional Amplifier Bi-directional Amplifier #801102 (43dB Model) #804001 (43dB Model) #801103 (50dB Model) #804003 (50dB Model) #801104 (60dB Model) #804004 (60dB Model) FCC ID: PWO824WB56 FCC ID: PWO806WB56 IC: 4726A-824WB56 IC: 4726A-806WB56 Wilson Electronics, Inc. -
Page 2: Package Contents
AMPLIFIED and transmitted to the cell site through the outside antenna. The information provided by Wilson Electronics, Inc. is believed to be complete and accurate. However, no responsibility is assumed by Wilson Electronics, Inc. for any business or per- sonal losses arising from its use, or for any infringements of patents or other rights of third parties that may result from its use. - Page 3 4. AMPLIFIER INSTALLATION (see illustration on 4-5) 4.1 Installing the Wilson Cellular Outside Antenna 4.1.1 Select a location on the roof using your AMPS/iDEN phone in test mode to find the best signal strength. (See leaflet titled PHONE TEST MODES) 4.1.2 The Outside Antenna should be located in an area with at least a 3’...
- Page 4 ��������� ���������� ��������� ���������� �������� �������� ����� 5. AMPLIFIER SPECIFICATIONS FOR AMPS 43dB, 50dB & 60dB MODELS Part #: 801102 (43dB Model) & 801103 (50dB Model) & 801104 (60dB Model) 43dB 50dB 60dB Frequency 824-849MHz Uplink 869-894MHz Downlink Gain (up/down) (43dB/43dB)
-
Page 5: Amplifier Layout
AMPLIFIER LAYOUT KEEP A SEPARATION DISTANCE OF AT LEAST 20ft HORIZONTAL AND 5ft VERTI- CAL BETWEEN ANTENNAS If using the Yagi Antenna, make sure the Yagi is pointed AWAY from the inside antenna. AMPS/iDEN AMPLIFIER PHYSICAL SPECIFICATIONS ������ ������� Connectors FME-Male 50 Ohms ��������... -
Page 6: Tech Support
6. OPTIONAL ACCESSORIES/ANTENNA OPTIONS 6.1 2-Way RF Splitter - allows for multiple inside antennas. 6.2 Coax Cable Extensions 50Ω (see chart on next page) 6.3 Antenna Options: Inside Antenna Options Outside Antenna Option 301103 - Magnet Mount 301111 - Yagi 301106 - Stealth 301113 - Mini Magnet 6.4 N-Female To FME-Female Adapter - Adapts 9913 Coax to fit the AMPS/... - Page 7 EXTENSION CABLE CHART 951101 5’ Extension Cable RG 58 (0.6 db loss) Low Loss Coax 951102 10’ Extension Cable RG 58 (1.2 db loss) Low Loss Coax 951103 15’ Extension Cable RG 58 (1.8 db loss) Low Loss Coax 951104 20’...
-
Page 8: Antenna Options
���� ����������� ������������ ��� ��������� ����� �� NTENNA PTIONS ��� For more options visit www.wilsonelectronics.com ��� ������� ���� ������ ������ ����� ������� ���� ����� �������� ��� ��� �� ����� 1 YEAR WARRANTY 15 DAY The Wilson amplifier is warranted for one year against defects in workmanship MONEY BACK and/or materials and will be repaired or replaced, at the discretion of the manufac- GUARANTEE...