Wilson Electronics 801102 Installation Manual page 7

Table of Contents

Advertisement

951101
5' Extension Cable RG 58
Low Loss Coax
951102
10' Extension Cable RG 58
Low Loss Coax
951103
15' Extension Cable RG 58
Low Loss Coax
951104
20' Extension Cable RG 58
Low Loss Coax
951108
20' Extension Cable 9913
Ultra Low Loss Coax
951105
30' Extension Cable 9913
Ultra Low Loss Coax
951106
50' Extension Cable 9913
Ultra Low Loss Coax
951107
100' Extension 9913 Low
Loss Coax
951110
2' Extension RG 58 Low
Loss Coax
(N-Male to FME Female)
951113
2' Extension 9913 Ultra
Low Loss Coax
(N-Male to N Male Ends)
RG 58 - FME connectors / 9913 - N connectors
Operation is subject to the following two conditions: (1) This device may not cause
interference, and (2) this device must accept any interference, including interference that
EXTENSION CABLE CHART
may cause undesired operation of this device.
(0.6 db loss)
(1.2 db loss)
(1.8 db loss)
(2.4 db loss) Used with the Yagi
Antenna - (N-Male to FME Female)
Only use 9913 Low Loss Coax for
extensions 20' or longer (0.8 db loss)
(1.2 db loss)
(2.0 db loss)
(4.0 db loss)
Used with the Yagi antenna to help
find the optimum signal strength (for
installation purposes only).
(0.08 db loss) Jumper Coax - Can be
used to connect a splitter behind an
amplifier.
7

Advertisement

Table of Contents
loading

This manual is also suitable for:

801104804001804003804004801103

Table of Contents