General Your new Wilson Electronics signal booster has been carefully engineered to significantly improve the performance of your iPhone* in mobile applications . Together with an outside antenna, the signal booster’s state-of-the-art circuitry is designed to increase your iPhone* signal to and from the cell tower, up to 20 times greater than the iPhone* alone .
(301101) Before Getting Started This guide will help you properly install Wilson Electronics iBooster Dual-Band Wireless Signal Booster . It is important to read through all of the installation steps prior to actual installation. For further assistance please call Wilson Electronics Technical Support Team: 866-294-1660.
Page 4
. The antenna cable is small enough to easily tuck under the door seal or plastic molding . Contact Wilson Electronics Technical Support Team with any questions at 866-294-1660 or email: tech@wilsonelectronics.com Hours: 7 am to 6 pm MST.
Page 5
. The 12 volt AC socket on many vehicles is shut off with the ignition key . Contact Wilson Electronics Technical Support Team with any questions at 866-294-1660 or email: tech@wilsonelectronics.com Hours: 7 am to 6 pm MST.
If the vehicle power adapter plug is properly inserted with the switch on, but the plug’s light does not come on, then check the 12 volts from the car socket, and check the fuse in the PS1 plug . Contact Wilson Electronics Technical Support Team with any questions at 866-294-1660 or email: tech@wilsonelectronics.com...
. Remember to stay more than 8 inches away from a sunroof, rear or side windows . If none of the above corrects the problem, call Wilson Electronics Technical Support at 866-294-1660 . Warnings And Recommendations...
Page 8
Returned Material Authorization (RMA) number supplied by Wilson Electronics . Wilson Electronics shall, at its option, either repair or replace the product . Wilson Electronics will pay for delivery of the repaired or replaced product back to the original consumer within the continental United States .