Warnings And Recommendations - Wilson Electronics 2B1216 Installation Manual

Warnings and Recommendations

Warning: Verify that both the Outside Antenna and the adapter extension cable are
connected to the Signal Booster before powering up the Signal Booster .
Warning: Use only the power supply provided in this package . Use of a non-WIlson
Electronics products may damage your equipment .
Warning: RF Safety: All outside fixed antennas may not have gain that exceeds
15 dBi (less cable loss) and must be located at least 56 inches from all
people . All antennas shown on page one meet these requirements .
Lightning protection is recommended for all in-building installations .
It is recommended that outside building antenna installations comply with relevant electrical
codes .
NOTE: The aluminum casing of a Wilson Electronics Signal Booster will adjust very quickly
to the ambient temperature of its environment. For example, in the summer, when the
inside of a enclosure can be extremely hot, the Signal Boosters' optional fan will come on
to prevent overheating. The casing will be hot to the touch, similar to a metal door handle or
a steering wheel. Such high temperatures will not damage the Signal Booster, nor do they
pose a fire risk to the structure. As recommended in these instructions, install the Signal
Booster in a location with adequate ventilation. Keep the area free of items that could block
air flow to the Signal Booster. Do not install the Signal Booster in direct sunlight.
This device complies with Part 15 of FCC rules . The operation is subject to two conditions:
(1) This device may not cause harmful interference, and (2) this device must accept any
interference received, including interference that may cause undesired operation . Changes or
modifications not expressly approved by Wilson Electronics could void the authority to operate
this equipment .
About Wilson Electronics
Wilson Electronics, Inc . has been a leader in the wireless communications industry for over
40 years . The company designs and manufactures Signal Boosters, antennas and related
components that significantly improve cellular telephone signal reception and transmission
in a wide variety of applications, mobile, in-building, and M2M .
With extensive experience in antenna and Signal Booster research and design, the
company's engineering team uses a state-of-the-art testing laboratory, including an
anechoic chamber and network analyzers, to fine-tune antenna designs and performance .
For its Signal Boosters, Wilson Electronics uses a double electrically shielded RF
enclosure and cell tower simulators for compliance testing .
Wilson Electronics Signal Boosters feature patented Smart Technology ™ that enables
them to automatically adjust their power based on cell tower requirements . By detecting
and preventing oscillation feedback, signal overload and interference with other users,
these Smart Technology ™ Signal Boosters improve network cell phone areas without
compromising carrier systems . All products are engineered and assembled in the
company's 55,000-square-foot headquarters in St . George, Utah . Wilson Electronics has
product dealers in all 50 states as well as in countries around the world .
5
Contact Wilson Electronics Technical Support Team with any questions at 866-294-1660
or email: tech@wilsonelectronics.com Mon.- Fri. Hours: 7 am to 6 pm MST.