Wilson Electronics 271201 Installation Manual

Wilson Electronics 271201 Installation Manual

Advertisement

Signal Booster
Installation
Guide
Contents:
How it Works . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . 1
Before Getting Started . . . . . . . . . . . . . . . . . . . . . . . . . . . . 1
Quick Installation Overview . . . . . . . . . . . . . . . . . . . . . . . . 2
Installing the Low-Profile Antenna . . . . . . . . . . . . . . . . . . . 3
Warnings and Recommendations . . . . . . . . . . . . . . . . . . . 4
Understanding the Signal Booster Lights . . . . . . . . . . . . . 5
About Wilson Electronics . . . . . . . . . . . . . . . . . . . . . . . . . . 6
Guarantee and Warranty . . . . . . . . . . . . . . . . . . . . . . . . . . 6
Signal Booster Specifications . . . . . . . . . . . . . .Back Cover
Note: This manual contains important safety and operating information .
Please read and follow the instructions in this manual . Failure to
do so could be hazardous and result in damage to your Signal
Booster .
Mobile Wireless
Dual-Band
Cellular / PCS
Smart Technology ™
Signal Booster

Advertisement

Table of Contents
loading
Need help?

Need help?

Do you have a question about the 271201 and is the answer not in the manual?

Questions and answers

Subscribe to Our Youtube Channel

Summary of Contents for Wilson Electronics 271201

  • Page 1 Installing the Low-Profile Antenna . . . . . . . . . . . . . . . . . . . 3 Installing a Wilson Electronics Signal Booster . . . . . . . . . . 3 Powering Up a Wilson Electronics Signal Booster .
  • Page 2: How It Works

    Wilson Electronics manufactures a wide variety of antennas to help you customize your Signal Booster for your specific application . Several authorized antennas are shown above . See your dealer or visit www.WilsonElectronics.com .
  • Page 3: Quick Installation Overview

    Tuck Cable The outside and inside antennas must Under Seal be shielded from each other to prevent oscillation (feedback) . Contact Wilson Electronics’s Technical Support Team with any questions at 866-294-1660 Or email: tech@wilsonelectronics.com Hours: 7am to 6 pm MST.
  • Page 4: Installing The Low-Profile Antenna

    Antenna” on the Signal Booster . Attach the Low-Profile Antenna cable to the connector labeled “Inside Antenna” on the Signal Booster . Contact Wilson Electronics’s Technical Support Team with any questions at 866-294-1660 Or email: tech@wilsonelectronics.com Hours: 7am to 6 pm MST.
  • Page 5: Powering Up A Wilson Electronics Signal Booster

    Booster in a location with adequate ventilation, such as under the seat or under the dashboard. Keep the area free of items that could block air flow to the Signal Booster. Contact Wilson Electronics’s Technical Support Team with any questions at 866-294-1660 Or email: tech@wilsonelectronics.com...
  • Page 6: Understanding The Signal Booster Lights

    . The Signal Booster has temporarily shut down and will automatically reset when overload is no longer detected . Amber light on frequency indicator Contact Wilson Electronics’s Technical Support Team with any questions at 866-294-1660 Or email: tech@wilsonelectronics.com Hours: 7am to 6 pm MST.
  • Page 7: About Wilson Electronics

    Returned Material Authorization (RMA) number supplied by Wilson Electronics . Wilson Electronics shall, at its option, either repair or replace the product . Wilson Electronics will pay for delivery of the repaired or replaced product back to the original consumer within the continental U .S . .
  • Page 8: Specifications

    Wilson ® Electronics, Inc. 3301 East Deseret Drive, St . George, UT 84790 For additional Technical Support visit www .WilsonElectronics .com Phone: 866-294-1660 Fax: 435-656-2432 Part # AIG 110727 - REV .25 - 07 .21 .11...

This manual is also suitable for:

271701

Table of Contents

Save PDF