Fisher & Paykel WD8560F1 Installation Instructions And User Manual page 51

Solving dryer problems
PROBLEM
Linting.
Fabric damage.
TROUBLESHOOTING
POSSIBLE CAUSES
Washer dryer is
overloaded.
Loads not sorted correctly.
Clothes over dried.
New items have been
dried in the washer dryer
recently.
Delicate items not dried on
an appropriate cycle.
Metal parts on the items or
in the load.
Items not separated or
dried on an appropriate
cycle for the fabric type.
'Dryness Level' selected
not appropriate for the
fabric type.
Instructions on care label
not followed.
WHAT TO DO
Remove some items from the washer
dryer, cycles have certain capacity
limitations (refer to pages 30 and 31).
Dry lint givers separately from lint
receivers. Dry similar colours together
eg light coloured items with light
coloured items, dark items with
dark coloured items (refer to pages
23 – 26).
Over drying clothes in the dryer can
cause them to attract lint. Use an
auto sensing cycle or ensure you
check your load if using the 'Time
Dry' cycles to avoid over drying (refer
to pages 23 – 26).
New towels or flannelette sheets can
leave lint in the dryer, which may be
picked up by subsequent loads.
Dry delicate items on a 'Delicate'
cycle (refer to pages 24, 30 and 31).
Fasten zips and other clasps before
placing items in the washer dryer.
Dry similar items together. Ensure an
appropriate cycle is selected (refer to
pages 23 – 26).
Ensure the 'Dryness Level' selected
is appropriate for the fabric type.
Refer to the items care label (refer to
pages 30 and 31).
Follow the instructions on the care
label of the items.
49