Fisher & Paykel WD8560F1 Installation Instructions And User Manual page 21

Press 'POWER' to activate your washer dryer.
1
Select your wash or dry cycle by turning the SmartTouch™ Control Dial.
2
If you are wanting to perform a wash, dry or continuous wash and dry cycle touch the
3
'Select' button to change to the desired cycle functionality.
Choose your wash or dry options (if you wish to select options different from the
4
default options for the cycle).
Touch to start the cycle.
5
If you make an invalid selection the washer dryer will beep to alert you.
● ●
When the cycle finishes, your washer dryer will perform end of cycle beeps and then
● ●
turn off automatically.
If you wish to stop your washer dryer at any point during a wash or dry cycle simply
● ●
touch to pause the cycle. There may be a slight delay while the drum comes to a
stop, then the door will unlock. Under certain conditions however the door will remain
locked for safety reasons (refer to the 'Safety features' section).
If you wish to cancel or change the wash cycle once a cycle has started, simply touch
● ●
the button then select the new cycle. Touch
IMPORTANT!
For the best fabric and colour care, remove your clothes as soon as the cycle has
● ●
finished.
Failure to follow the advice in this guide may result in damage to your garments and
● ●
your expectations of wash and dry performance may not be met.
Sort and load items into the drum, ensuring no items are in the way of the door. Close
● ●
the door (you will hear it click).
3
GETTING STARTED QUICKLY
4
to restart the washer dryer.
5
19