Wash And Dry Cycle Options - Fisher & Paykel WD8560F1 Installation Instructions And User Manual

All wash and dry cycles default to the recommended options for that cycle based on
the average load expected to be washed. You can vary the options (eg 'Wash Temp',
'Spin Speed') to create your desired cycle. Note: some options are not available on some
cycles, for clothes care reasons, or because the option is not appropriate for the cycle.
To change a wash or dry option or options you have selected after a cycle has started,
simply touch
with the new setting or settings. Note: some options may not be available for selection
under certain conditions and after particular stages of the cycle have passed.
Wash Temp
Your washer dryer offers five wash temperatures:
Cold
Simply touch the 'Wash Temp' button to increase or decrease the wash temperature.
● ●
The washer dryer will fill with cold water and heat the water to the selected temperature
● ●
(if required).
Some temperatures are not available on some cycles as a safeguard for your clothes
● ●
(eg 90°C on the 'Delicate' cycle).
Spin Speed
Simply increase or decrease the spin speed by touching the 'Spin Speed' button.
● ●
Selecting different spin speeds will limit the wash, rinse and final spin speed.
Selecting 'No Spin' will end the cycle after the rinse, allowing you to remove items you
● ●
wish to drip dry. If you have removed the items you wish to drip dry and there are items
remaining that you would like to process to spin, press 'POWER' and select the Spin
cycle. If necessary, modify the spin speed to best care for your load (ie spin delicate
items at '500' rpm for best garment care).
Some continuous wash and dry cycles will limit spin speed selections to optimise drying
● ●
performance.
32

WASH AND DRY CYCLE OPTIONS

and select your new setting, then touch
30°C 40°C 60°C
again to resume the cycle
90°C