Fisher & Paykel WD8560F1 Installation Instructions And User Manual page 14

IMPORTANT!
This machine must not be installed and operated on a plinth.
Levelling the machine
It is IMPORTANT to level the machine to ensure good
spin performance, and to minimise noise, vibrations and
wear and tear on the washer dryer.
Before positioning the machine in its final position, check
1
that the machine is level, front to back and side to side.
Manoeuvre the product into its final position (we suggest
2
a minimum clearance of 20mm each side).
Use a spirit level to check that the machine is correctly
3
level. The washer dryer comes with four adjustable feet,
wind all four feet up or down until the dryer is correctly
level. Place the spirit level on top of your washer dryer in
the following places;
left to right,
● ●
back to front,
● ●
corner to corner.
● ●
The machine is considered level when the bubble sits in
the centre of the two lines when placed flat on top of
the machine.
Using the spanner provided, tighten the lock nuts against
4
the base of the machine to lock the feet in position.
Never unscrew the feet completely from their housings.
After levelling, the corners of the washer dryer cabinet
should be clear of the floor and the machine must not
rock in any direction.
12
INSTALLATION INSTRUCTIONS
Levelling the feet
Locking the feet