Fisher & Paykel WD8560F1 Installation Instructions And User Manual page 36

Front loading washer dryer
Hide thumbs Also See for WD8560F1:
Table of Contents

Advertisement

Dryness Level
Your washer dryer takes the guess work out of choosing drying times by sensing the
dryness of the load. When your washer dryer senses that the clothes have dried to the
dryness level you have selected, the washer dryer will automatically enter the cool down
phase then finish the cycle.
The washer dryer has three dryness levels to choose from; 'Damp', 'Dry' and 'Extra Dry'.
Choose the dryness level to suit your load depending on how dry you wish your clothes
to be. If you find the load is not dry enough, select the next dryness level up. The higher
the level, the longer the drying time and the drier your clothes will become.
Once the washer dryer has sensed that the load is dry it will automatically go into an
airing or cool down phase. During cool down the drum tumbles and cool air is blown
through the clothes. The machine will end the cycle when the load and the machine
have reached a safe temperature.
If you wish to, you can select a combination of these options to operate on the same
cycle. Simply touch the appropriate button until both options are selected. Repeat to
deselect an option.
For clothes care and performance reasons not all options may be available on some
cycles.
Add a Garment
The 'Add a Garment' option enables you to add or remove items during the wash or
drying stages of a cycle, under certain conditions. Once the 'Add a Garment' button
is touched during a wash cycle, the
hear the door unlock. Open the door and add or remove items. Close the door and touch
to restart the cycle. The 'Add a Garment' button will only operate when the wash
temperature selected is lower than 60°C. 'Add a Garment' can be used when the total
wash volume has been reached, as your washer dryer will drain the water to a lower
level if necessary, so the door can be opened.
If selecting 'Add a Garment' in a drying cycle the machine will automatically go into a
cool down phase and will display
to a safe level. This may take a while depending on the cycle selected, load type, load
size and drying cycle completion time. The door will unlock when it has reached a safe
temperature for you to add or remove items. Close the door and touch
cycle. The machine will display
will be displayed.
34
WASH AND DRY CYCLE OPTIONS
until the end of the cycle is reached then
button and time to go will flash. Wait until you
to decrease the temperature inside the drum
to restart the

Advertisement

Table of Contents
loading

This manual is also suitable for:

Wd7560p1Wd8060p1

Table of Contents