Washer Dryer Controls - Fisher & Paykel WD8560F1 Installation Instructions And User Manual

WASHER DRYER CONTROLS

SmartTouch™ Control Dial
The SmartTouch™ Control Dial provides easy and
efficient wash and dry cycle selection. As you rotate
the dial, the icon of the wash or dry cycle selected
will be illuminated, while the default settings for
SmartTouch™ Control Dial
that cycle will be illuminated on the right side of the
control panel.
SmartTouch™ buttons
The smooth, easy clean buttons enable simple
selection of options with lights clearly showing the
selections you are making.
SmartTouch™ buttons
Digital display screen
The digital display screen provides an estimate of
how long the wash or dry cycle has to go. If you have
programmed a 'Delay Start', the time remaining until
the cycle will start will be displayed here, along with
any messages to help you with the overall running of
your washer dryer (eg user warnings).
Digital display screen
Progress lights
The progress lights indicate what part of the cycle
the washer dryer is currently performing (wash, spin,
dry). Two lights are on at the beginning of a wash
cycle and all three lights are on at the beginning of
a continuous wash and dry cycle. The light for the
Progress lights
current part of the cycle flashes, and each one goes
out when that part of the cycle is complete.
Keylock mode
'Keylock' can be used to lock the buttons on your
washer dryer. This will avoid accidental button
pushes. For more detail please refer to the 'Wash and
dry cycle options' section.
'Keylock' mode
Drum light (WD8560F1 model only)
Your machine has a drum light to help assist you
when loading and unloading your washer dryer.
When you press 'POWER', the LED light in the drum
will turn on. After 2 minutes it will automatically turn
off. At the end of the cycle, the drum light will turn
on again for 5 minutes to help aid unloading.
20