Rear Panel Ports; Rear Panel Connections - Planet G.SHDSL Bridge/Router GRT-402 User Manual

PLANET Technology Corp.
Table 2-2 GRT-401/GRT-402 LED Functions
LEDs
PWR
LNK
WAN
ACT
1
2
LAN
3
4
ALM

2.2 Rear Panel Ports

The connectors on the rear panel provide Power, LAN, CONSOLE and LINE
interfaces.
Figure 2-5 GRT-401/GRT-402 Rear Panel
The following table describes the connectors' functions:
Connectors
DC-IN Power adaptor inlet: Input voltage 9VDC
LAN Ethernet interface for LAN port (RJ-45)
CONSOLE RS- 232C (DB9) for system configuration and maintenance
LINE SHDSL interface for WAN port (RJ-11)
RST Reset button for factory default

2.3 Rear Panel Connections

The figure shows the rear panel connections of GRT series.
Active Color
On Green
On Green
On Green
On Green
On Green
On Green
On Green
On Red
Figure 2-4 GRT-101 Rear Panel
Table 2-3 Connector Functions
- -
GRT-101/401/402 User's Manual
Power adaptor is connected to GRT-101/GRT-401
SHDSL line connection is established
Transmit or received data over SHDSL link
Transmit or received data over LAN 1
Transmit or received data over LAN 2
Transmit or received data over LAN 3
Transmit or received data over LAN 4
SHDSL connection disconnected
Description
5
Description