PLANET Technology Corp.
3.4.7 Reboot
To reboot GRT series, use reboot command. Move cursor to " >> " to write
and press enter.
---------------------------------------------------------------------
Command: reboot <CR>
Message: Please input the following information.
Do you want to reboot? (y/n): y
---------------------------------------------------------------------
3.4.8 Ping
Ping command will be used to test the connection of router. Move cursor " >>
" to ping and press enter.
---------------------------------------------------------------------
Command: ping <ip> [1~65534|-t] [1~1999]
Message: Please input the following information.
IP address <IP> : 10.0.0.1
Number of ping request packets to send (TAB select): 1~65534
Data size [1~1999]: 32
---------------------------------------------------------------------
3.5 Administration
You can modify the user profile, telnet access, SNMP (Simple Network
Management Protocol), supervisor information and SNTP (Simple Network
Time Protocol) in machine enable mode.
For configuration the parameters, move the cursor " >> " to admin and press
enter.
>> user
security
snmp
passwd
Id
sntp
3.5.1 User Profile
You can use user command to clear, modify and list the user profile. You can
setup at most five users to access GRT series via console port or telent in user
Manage user profile
Setup system security
Configure SNMP parameter
Change supervisor password
Change supervisor ID
Configure time synchronization
GRT-101/401/402 User's Manual
- -
42