Wan Ip Address; Isp Profile For Ppp - Planet G.SHDSL Bridge/Router GRT-402 User Manual

PLANET Technology Corp.
WAN 8 Disable
To save the new WAN port configuration, enter:
admin# write

3.12.4 WAN IP address

Note: This sub-section is for routing mode operation with protocol of "Ethernet" and/or "IPoA" only. For PPP
connections, it is unnecessary to set the WAN port IP address and subnet mask.
To set the WAN 3 with IP address of 192.168.3.3 and subnet mask of
255.255.255.0, follow the following example:
admin# setup wan 3 address 192.168.3.3 255.255.255.0
To review the new configuration you have configured, type:
admin# setup wan 3 list
WAN Interface Parameters
Int. Link IP Address/
---- -------- ----------------------------- --------- ------ --- ----
WAN 1 Disable
WAN 2 Disable
WAN 3 Ethernet 192.168.3.3/ 255.255.255.0
WAN 4 Disable
WAN 5 Disable
WAN 6 Disable
WAN 7 Disable
WAN 8 Disable
To save the new WAN port configuration, enter:
admin# write

3.12.5 ISP profile for PPP

Note: This sub-section is for routing mode operation only.
GRT-101/401/402 User's Manual
Netmask VPI/ VCI Encap. QoS PCR
0/ 135 VC-Mux CBR 512
- - 61