Console Configuration - Planet G.SHDSL Bridge/Router GRT-402 User Manual

PLANET Technology Corp.
18. The screen will prompt the new configured parameters. Check the
parameters and click Restart, the router will reboot with the new setting or
click Continue to configure other parameters.

Console Configuration

Do the following steps:
1. User : admin
2. enable
3. setup mode
4. wan Interface number (1~8) : 1
protocol
vpi_vci: 0
32
encap
isp account: user1@net
password: user1
idle time out: 0 ~ 600
5. lan address
6. (back to root) write
password: admin
supervisor password: root
Route
PPPoA or PPPoE
LLC
192.168.0.1
255.255.255.0
attrib Virtual
y
y (reboot)
GRT-101/401/402 User's Manual
(the unit is in minute)
- - 15