User Profile - Planet G.SHDSL Bridge/Router GRT-402 User Manual

PLANET Technology Corp.
----- --------------- --------------- --- ----- ------ -------- ------
WAN1 192.168. 1. 1/255.255.255. 0
To list active route status currently, type:
admin# status route
Flag Destination /
---- ------------------------------------------ ------------ ---------
S 0.0.0.0/
C 200.0.8.0/ 255.255.255.0/ directly
C 192.168.0.0/ 255.255.255.0/ directly
C 127.0.0.1/255.255.255.255/ directly

3.14 User Profile

GRT series comes pre-configured with user profile 1 already established, that
is, user "admin" with password of "admin" and menu driven user interface. The
maximum number of user profiles is limited to 5. You can add, delete, modify,
or list the user profiles with the commands in the following examples.
To change anyone of the user name and password, you must provide both
items together. For example, to change the password only to "76gu94t" for
user profile 1 (default user name "admin"), enter:
admin# admin user modify 1 profile admin 76gu94t
For user profile 1 with password "76gu94t", to change the username to "titan"
type:
admin# admin user modify 1 profile titan 76gu94t
Certainly, you can change both user name and password in one command line.
The maximum length of user name and password is limited to 19.
To set the user interface for an existing user profile, e.g., user profile 1, use
"modify" and "attrib" commands:
admin# admin user modify 1 attrib command
The following commands add a new user profile 2 "test" with password
"83fdi7s", and set the user interface to menu mode:
admin# admin user modify 2 attrib menu
admin# admin user modify 2 profile test 83fdi7s
Netmask / Gateway
0.0.0.0/ 200.0.8.254
- - 64
GRT-101/401/402 User's Manual
0/ 32 LLC
Interface
200.0.8.1
200.0.8.1
192.168.0.218
127.0.0.1 Loopback
IPoA Yes
Portname
WAN1
WAN1
LAN