Advertisement
Once the terminal has connected to the device, power on the device, the terminal will
display that it is running POST (Power on self-test) procedures.
Then, screen as below will show up. The ERT-805 will prompt with ">". This means ERT-
805 is in operating mode now.
Types "enable" to enter privilege mode. The ERT-805 will prompt with "#" for privilege
mode. By default there is no password.
Note:
For security reason, please follow the following section to change
the new password after this first setup. Memorize the password
or write it down and store in a secured place.
Chapter 3
Logon to the Console
5
Advertisement
