Saving The Configuration Via The Console - Planet GS-4210-24P2S Quick Installation Manual

6. Saving the Configuration via the Console
In switch, the running configuration file stores in the RAM. In the current version,
the running configuration sequence running-config can be saved from the RAM to
FLASH by save command or copy running-config startup-config command, so
that the running configuration sequence becomes the startup configuration file,
which is called configuration save.
1. On "GS-4210-24P2S#" prompt, enter "copy running-config startup-config"
as shown in Figure 6-1.
Figure 6-1: Saving the Configuration Screen
9