Direction 5180483-100, Rev - GE LOGIQ E9 Service Manual

D 5180483-100, R
IRECTION
Table 1-6
PROPRIETARY TO GE
. 7
EV
Product icons (Continued) 4 of 8
LABEL/SYMBOL
or
Chapter 1 Introduction
PURPOSE/MEANING
"PINCH POINT"
Indicates moving parts that may cause
injury (such as the top, rear of the LCD
Arm or XYZ Mech).
"Mains ON"
Indicates the Power ON position of the
mains power switch.
"ON" Indicates the power on position of
the power switch.
CAUTION
THE ON/OFF BUTTON ON
THE OPERATOR PANEL
DOES NOT ISOLATE MAINS
SUPPLY
ON/OFF button
CAUTION
SYSTEM SHUTDOWN USING
THE ON/OFF BUTTON DOES
NOT DISCONNECT LOGIQ E9
FROM MAINS VOLTAGE.
For disconnecting LOGIQ E9 from
mains voltage after system shutdown,
please set the circuit breaker close to
the mains inlet to OFF as described in
4-2-4 "Power shut down" on page
"Protective Earth"
Indicates the protective earth
(grounding) terminal.
"Equipotential"
Indicates the terminal to be used for
connecting equipotential conductors
when interconnecting (grounding) with
other equipment as described in
IEC60601-1.
Alternating Current symbol is in
accordance with IEC 60878-01-14.
LOGIQ E9 P
ROPRIETARY
LOCATION
Various
Rear of console
Operating Panel
4-7.
Used several places inside the system.
Rear of console
Rear Panel, Rating Plate, Circuit
breaker label of console and Front
Panel (if applicable).
S M
ERVICE ANUAL
1 - 13