Printer/Dvr Checks; Peripheral Checks; Available Probes; Software Options Configuration - GE LOGIQ E9 Service Manual

D 5180483-100, R
IRECTION
3-7-4-5

Printer/DVR Checks

Check that Printer/DVR work as described below:
Table 3-6
Step
1.
Press Freeze.
Press (Print 1), (Print 2), (Print 3) or (Print 4) on
2.
the Control Panel
3.
Press [VIDEO] icon on the Control Panel.
4.
Press [VIDEO] icon on the Control Panel
5.
Press [RECORD] icon on the Control panel.
6.
Press [PLAY] icon on the Control panel.
7.
Press [STOP] icon on the Control panel.
3-7-4-6

Test the DVR Microphone

If a DVR is installed, record and/or play back a recording to test the microphone.
a.) In scanning mode, press the record button on the console.
b.) Press the microphone icon button on the touch panel.
c.) Note the counter number setting, speak a few words, rewind to original counter number, and
3-7-4-7

Turn OFF Power to LOGIQ E9

See:
3-6-9 "Power shut down" on page
3-7-5

Available Probes

See:
Section 9-18 "Probes" on page
3-7-6

Software Options Configuration

3-7-6-1 Software Option Installation
A password (Software Option String) enables a software option or a combination of software options.
This password is specific for each LOGIQ E9.
3 - 36
PROPRIETARY TO GE
. 7
EV

Peripheral Checks

Task to do
play back.
Section 3-7 - Configuration
LOGIQ E9 P
Stops image acquisition.
Prints image displayed on the screen on Black and White or Color
printer, depending on the key assignment configuration.
Brings up the DVR Touch Panel (if the customer has the DVR option).
Returns to the scanning mode
Starts Recording.
Plays back an examination.
Stops recording.
3-28.
9-112.
S M
ROPRIETARY ERVICE
Notes
ANUAL