How Fe Remotely Enables Disruptive Mode And Vco; Service Log Screen - GE LOGIQ E9 Service Manual

D 5180483-100, R
IRECTION
7-6-4

How FE Remotely Enables Disruptive Mode and VCO

1.) The OLC or FE connects to the remote scanner or workstation through a Remote Service Tool
(RST).
NOTE: The behavior of the Remote Service Tool (RST) is beyond the scope of this manual. The
following steps describe the activities that take place once the OLC or FE remotely enables
connection to the scanner or workstation.
Once connected to the remote scanner the OLC or FE will sign in at the Service Login Screen (See:
Figure 7-134 "Service Log Screen" on page 7-167).
2.) Select "GE Service", enter the current password, and select Okay.
3.) Select Utility -> Common Utilities -> Disruptive Mode (See: Figure 7-135 "Disruptive Mode" on
page 7-168).
PROPRIETARY TO GE
. 7
EV
Figure 7-134 Service Log Screen
Chapter 7 Diagnostics/Troubleshooting
LOGIQ E9 P
ROPRIETARY
S M
ERVICE ANUAL
7 - 167