The Tilt And Shock Indicators; Tipntell Indicator And Label; Overview - GE LOGIQ E9 Service Manual

D 5180483-100, R
IRECTION
3-3-5

The Tilt and Shock indicators

3-3-5-1

Overview

Improper handling during transportation may harm the equipment inside the package even if the
package itself is undamaged.
To make it easier to detect if the handling during transportation has been improper, a Tilt or TIPNTELL
indicator and a Shock indicator have been attached to the transportation box.
3-3-5-2 Position of the Tilt or TipNTell and Shock indicators
The Tilt and Shock indicators have been attached to the side of the transportation box.
Figure 3-1 Tilt and Shock indicators
Figure 3-2 TIPNTELL indicator and Label
NOTE: Before cutting the straps, check the Tilt or TIPNTELL and Shock indicators to make sure they
have not been triggered. If triggered, report it to the carrier. If not, then cut the straps around
the crate.
3 - 6
PROPRIETARY TO GE
. 7
EV
Section 3-3 - Receiving and unpacking the equipment
LOGIQ E9 P
ROPRIETARY
S M
ERVICE ANUAL