Starting Accu-Gold Via Wi-Fi - Radcal ACCU-GOLD2 User Manual

Accu-Gold

Starting Accu-Gold via Wi-Fi

For detail Nugget information, see Appendix C.
Snap the Nugget onto the digitizer module. Power on the Nugget and wait for the connection light to
indicate being ready for connections (flashing green).
Start Accu-Gold2 and choose Connect via Wi-Fi:
The software will look for "Nugget..." on the wireless networks list, and establish a connection to it
sending it the password it requires.
After a successful connection, you will see on the bottom:
The battery icon displays the charge level of the Nugget's battery. It will initialize communication with the
digitizer and power on the sensors. The measurement process is the same as using the USB cable
directly. See Appendix C for the measurement feature comparison.
USER GUIDE
10