Comments - Radcal ACCU-GOLD2 User Manual

Accu-Gold
You can continue to review the data in List or Wave view by clicking on the List or Wave buttons in the
title bar. You can also non-destructively switch from viewing measurements in Gy to R by clicking Main
Menu drop-down and selecting Unit Settings. If additional changes are made, click the drop-down menu
and choose Save (Ctrl-s).
9. If you need to reposition the sensor(s), click the Disconnect button to temporarily take the
sensor offline and prevent any inadvertent null exposures from being added to your
measurement. You can delete unwanted measurements at a later time by highlighting the
measurement in any tab and clicking the Delete button (trash can).
10. Click Connect when you are ready to make your next measurement.

Comments

The Comments pane can be used to enter notes or copy and paste details regarding the measurement.
Comments are saved in the session along with any measurements and can optionally be carried over to
the next measurement. The Comments pane can be accessed from all views. You can minimize the
pane by clicking on the top arrow.
Append Snippet – The following can be pasted in the comments area to aid documenting
measurements:
Location:
Generator:
Sensor position:
kVp:
mA/mAs:
Time (s):
SDD (cm):
Append snippet
Minimize
Copy
Paste
Carry-over
USER GUIDE
20