Accu-Gold
Rh Rh GE
Rh Cu
W Rh
W Al
W Ag
Additional anode/filter combinations for specific machines are also included (see Appendix B)
Making a Measurement with multiple sensors connected
The Accu-Gold Digitizer Module (AGDM) allows you to connect up to five sensors and simultaneously
collect data from all of the connected sensors. (The Rapid-Gold Digitizer Module (RGDM) and Accu-
Dose Digitizer Module (ADDM) have a subset of these ports – see table on page 6.) The five sensor
ports are:
•
AGMS – Accu-Gold multi-sensor
•
ICH – Ion Chamber
•
DD – Dose Diode
•
mAs – Invasive and non-invasive mA/mAs sensors
•
AUX – Auxiliary connector for the light sensor, DAPCKP+ (uses Accu-Gold Excel software only),
and future sensors (Aux sensors are not available for use with the Nugget)
To make a measurement using more than one sensor:
1. Click Disconnect in the Accu-Gold software Measurment view to stop the software from taking
measurements.
2. Plug any additional sensors into the available ports.
3. Position the new sensors into the X-ray beam.
4. Press Connect to bring the sensor on line and stabilize. Select a trigger source and expose to
X-rays.
In this example, an Ion chamber sensor is connected along with the multi-sensor and a mAs meter.
GE DMR
GE DMR
Selenia
Selenia
Selenia
USER GUIDE
22