Accu-Gold Measurements And Feature Comparison; Appendix D - Radcal ACCU-GOLD2 User Manual

Accu-Gold
The Wi-Fi module used by the Nugget (AGNUGGET-JP only) has been certified for use in
Japan.
(1) "2.4": Represents radio equipment using the 2.4 GHz band.
(2) "DS/OF": Represents modulation system (refer to Section 2.4.1 for details
(3) "4": Represents estimated interference-causing radius to premises radio stations for RFID
(refer to Section 2.4.2 for details
(4) "
the band used by RFID systems (refer to Section 2.4.3 for details
China PRC (CMIIT)
The equipment contains the RF modules of which Type Approval code is CMIIT ID: 2014DJ6439

Appendix D

Accu-Gold measurements and Feature comparison

The following are measurements that can be assigned to any cell when creating custom profiles. These
are grouped by the measurement source. Note that not all measurements are available when using the
Nugget.
Digitizer
Air Pressure
Ave. Pulse Duration
Duration
Pre-Pulse Detected
Pre-Pulse Duration
Pulse Count
Pulse Duty Cycle
Pulse Frequency
Pulse Rep. Period
Total Duration
Trigger Level
Trigger Sensor
Typical Pulse Count
Multi-Sensor
Anode
10
SECOND GENERATION LOW POWER DATA COMMUNICATION SYSTEM/WIRELESS LAN
SYSTEM ARIB STD-T66
1
).
": Indicates that the equipment can use the entire band and is capable of avoiding
USB Cable Nugget
yes yes
yes yes
yes yes
yes no
yes no
yes yes
yes yes
yes yes
yes no
yes no
yes yes
yes yes
yes no
USB Cable Nugget
yes yes
USER GUIDE
2
).
Definition
The atmospheric corrections compensate for the effects of
variations in the current temperature (T in C) and pressure
(P in kPa) on an unsealed ion chamber and uses the
following
Displayed value = (101.3/P) * ((T + 273.15)/295.15) *
Instrument value
Average duration of pulses.
Exposure duration from start to stop trigger. If pre-pulse
detection was activated, duration is the duration of the
main signal without pre-pulse.
True if pre-pulse detection was active and pre-pulse
signal was detected.
Duration from detection of pre-pulse start to main signal
start.
Measurement pulse count.
Pulse duty cycle.
Pulse frequency
Measurement pulse repetition period.
Exposure duration from start to stop trigger, ignores pre-
pulse detection.
Trigger level used for this measurement.
Sensor that was trigger.
Measurement pulse count ignoring scout pulse.
Definition
Tube anode setting used for this measurement.
10
).
equation:
83