Accu-Gold
USER GUIDE
Select Dynamic Stop Trigger Off:
New exposure with Dynamic stop trigger Off:
AGMS Pre-Pulse Mode
The "AGMS Pre-Pulse Mode" algorithm is designed to accommodate the initial pre-heat kV pulses
commonly found with some dental generators such as the Gendex 770. Pre-Pulse ON should not be
selected for other pulsed waveforms such as pulsed fluoroscopy or tomography.
Note: The dose remains integrated over the entire exposure regardless of the setting (On or Off), only
the kV and time calculations are affected. Advice: The Accu-Gold default setting is AGMS Pre-Pulse
Mode "Off". If the correct number of pulses is not being reported, select "Settings" and then turn On
"AGMS Pre Pulse Mode" and repeat the exposure.
15