Starting Accu-Gold Via Wi-Fi - Radcal ACCU-GOLD2 User Manual

Starting Accu-Gold via Wi-Fi

For detail Nugget information, see Appendix C.
Snap the Nugget onto the digitizer module. Power on the Nugget and wait for the connection light to
indicate being ready for connection (flashing green).
For the Accu-Gold Touch, start the Touch in WiFi mode and wait for the blue light to flash rapidly.
Start Accu-Gold2 and choose Connect via Wi-Fi:
The software will look for "Nugget..." (or "Touch") on the wireless networks list, and establish a connection
to it sending it the password it requires.
After a successful connection, you will see on the bottom:
The battery icon displays the charge level of the Nugget's (or Touch's) battery. It will initialize
communication with the digitizer and power on the sensors. The measurement process is the same as
using the USB cable directly. See Appendix C for the measurement feature comparison.
Note: some features are not available when using AG2 in WiFi mode.
10